·With a maximal lifting capacity of 1000kg a rise height of 1200mm and the platform being as wide as 800mm, it is fit for service and repair to various sizes of motorcycle. Surface mounting.
·Built-in power unit. Good looking and space saving.
·Rising and lowering movement is easily done using a magnetic hand-held control unit with 24V operative voltage.
·Electrical release device. It is very convenient to disengage the mechanical locking unit for lowering operation.
·The ramp is made as low as an angle of 10 degrees for easier drive-on.
·The drop-down plates are available at both ends of the platform for model EE-MLH10D.
·The drop-down plate is available at the rear side of the lifting platform for model EE-MLH10.
·Robust and automatic mechanical locking device.
·Protective device against leakage. No unexpected collapse in case of oil hose breakage.
·Hydraulically protected against overloading.
·Standard manually-operated wheel-clamping device. Its width is adjustable so as to fit the most types of tires.
·Tool tray at both sides.
·Each side of the lifting platform is reserved with 4 slots for binding straps so as to satisfy stability requirement in various working circumstances.
·Optional mobile kit for moving the lift conveniently.
·Optional width-extension platform for lifting ATVs, mowers, etc. (Width-extension platform dimensioned 350mm are available)
·Over load dynamic test with 115% of the rated load.
·Over load static test with 150% of the rated load.
·CE certified.
·Electrostatic painting with good adhesion performance.
Model | MLH10/MLH10D |
Rated load | 1000kg |
Rise height | 1200mm |
Initial height | 195mm |
Standard Platform Size (L x W) | 2200x800mm |
Rise time | 30S |
Voltage |
220V/1Ph
|
Power | 0.75kW |
Horizontally installed power unit
Drive-on ramp
Electrical release device
Rear side drop-down plate-MLH10D/MLH10
Front side drop-down plate-MLH10
Manually operated wheel clamp
Jack
350mm Optional Side Extensions
Mobile kit
Please enter your password