×

E25 | 5.0T Two independent columns

● With a maximum capacity of 5000kg, it is especially suitable for lifting large pickups, SUVs, MPVs, vans, small caravans, medium buses and light trucks.
● No more obstructions at your feet and let you and your tool cart move easier under the lifted vehicle.

E28 | 8.0T Two independent columns

● 8000kg lifting capacity
● 1900mm Lifting height
● Hydraulic drive, PLC control, precise synchronization with no steel ropes

62BE | 3.5T/4.2T/5.0T Two post lift with APS technology

● 3500kg / 4200kg Lifting capacity
● With APS technology (Accurate Parking System)
● 1900mm lifting height
● One hand and one side operation

F9M/F10M/F12M | 3.5T/4.2T/5.5T One side manual release

● 3500kg/4200/5500kg lifting capacity
● Single side release for mechanical safety locking unit
● 24V safety control system

6214EKZ/6215EKZ | 4.0T/5.0T Asymmetric clear floor lift

● 4000kg/5000kg Lifting capacity
● 1970mm lifting height
● Asymmetric,30 degree of columns installation makes door open wider

62CE | 3.5T/4.2T/5.0T/6.0T Two post lift with APS technology

● 3500kg /4200Kg/5000kg/6000kg lifting capacity
● With APS technology (Accurate Parking System)
● 1900mm lifting height
● One hand and one side operation

C9M/C10M | 3.5T/4.2T One side manual release

● 3500/4200kg lifting capacity
● Single side release for mechanical safety locking unit.
● Cylinder straight top device, run more smoothly
● 24V safe control system

6445P | 4.0T Parking Lift

● 4000kg lifting capacity
● 1970mm lifting height
● 4900mm longer runways
● Easy on-site installation and less demanding on foundation

6435S | 4.0/5.0T/6.5T Four Post Lift

● Flat platform for general service use
● Electrical Safety Lock Release System (E version)
● 5780 mm Max. platform length
● Reliable mechanical safety locking system

6435B | 4.0/5.0T/6.5T Four Post Lif

● Long slip plate and adjustable turntable positions for alignment use
● Electrical Safety Lock Release System (E version)
● With the maximum lifting capacity being up to 6500kg
● 6280 mm Max. platform length

6435BPD | 4.0/5.0T Four Post Lift

● MOT four post lifts for Class IV&VII vehicles
● Electrical Safety Lock Release System (E version)
● 5780 mm Max. platform length
● Reliable mechanical safety locking system

6435BWF | 4.0/5.0T Four Post Lift

● Electrical Safety Lock Release System (E version)
● 5780 mm Max. platform length
● Standard Wheel Free Lift witch with 4000 kg lifting capacity

65A | 4.0T Full Rise Scissor Lift

● 4000 kg lifting capacity
● 130mm drive-on height
● 1930mm Max. Lifting height
● Above-ground or in-ground installation

6503 | 3.5T Full Rise Scissor Lift

● Automatic Leveling System or electrical leveling available
● Extendable platform, one side or double sides for long vehicles
● In-ground installation

6501 | 3.0T Full Rise Scissor Lift

● 3000kg lifting capacity
● 110mm drive-on height
● Starting up plate ensures quiet ground touching
● Above-ground or in-ground installation

MR35 | 3.5T Mid Rise Scissor Lift

● 3500kg lifting capacity
● 110mm drive-on height
● Starting-Up plate, for easy raising from low point
● Mobile or fixed mount design

MR30 | 3.0T Mid Rise Scissor Lift

● 3000kg lifting capacity
● 105mm drive-on height
● Double safety ,hydraulic and mechanical
● Mobile or fixed mount design

TS6600 | 3.0T Mid Rise Scissor Lift

● 3000kg lifting capacity
● Portable, easy to move
● Double safety ,hydraulic and mechanical

HX6BWF | 6.0T Long Platform Scissor Lift

● 6000kg lifting capacity
● 5424mm long flat runways for general service use
● Electrical levelling
● Standard Wheel Free Lift

6603 Series | 4.2T/5.0T Alignment Scissor Lift

● 5000kg lifting capacity
● 5100mm Max. Platform Length
● Automatic Leveling System
● Standard Wheel Free Lift

6604 Series | 4.0T Low Profile Scissor Lift

● 4000kg lifting capacity
● 180mm Drive-on height
● Surface installation, no concrete works needed ramps included
● Standard Wheel Free Lift

LX35B | 3.5T Low Profile Scissor Lift

● Long slip plate and adjustable turntable positions for alignment use
● 3500kg lifting capacity
● 140mm Drive-on height
● Add-On Wheel Alginment runway kit

HDM Series | 8T/10T Heavy Duty Mobile Column

● 8000KG/10000KG capacity per column
● Maximum 48 columns
● Wireless Communication
● STM32 microchip technology in the control system
● Communicate wirelessly by WLAN or be connected by cables

HX Series | 15T Heavy Duty Long Platform Scissor Lift

● 15000kg-45000kg lifting capacity
● 8000mm long flat runways for general service use
● Visual interface technology
● Maximally set up by combining 3 sets of lift (6 lift platforms) working synchronously together.

MLH10 | 1000kg Heavy-duty Motorcycle Lift

● 1000kg lifting capacity
● Hydraulic driven system, smooth running
● Applicable to motorcycles, ATVS, lawn mower etc.

CJ | 3.0T Rolling Jack

● 3000kg lifting capacity
● Durable and compact scissor carrying structure
● Adjustable width between support wheels to fit different widths between runways

MS12M | 1.2T Hydraulic Mobile Lifting Table

This mobile lifting table is designed for dismantling and fixing batteries of electric vehicles as well as engine, gearbox, drive axle, fuel tank,suspension, bracket and chassis components of traditional vehicles.

MS10 | 1.0T Mobile Lifting Table

This mobile lifting table is designed for dismantling and fixing batteries of electric vehicles as well as engine, gearbox, drive axle, fuel tank,suspension, bracket and chassis components of traditional vehicles.
EAE AUTOMOTIVE EQUIPMENT
  • 2003Established EAE Automotive Equipment Company Limited.
  • 2005

    Participated in the Beijing Auto Maintenance and Repair Expo (AMR) and Automechanika Shanghai.

  • 2007

    Awarded China’s Top Ten Garage Equipment Brand Award.
    Participated Automotive Aftermarket Product Expo (AAPEX) in USA.
    Participated Automechanika Germany first time.

  • 2009

    Launched EAE’s first 5.5 ton large platform scissors lift.
    EAE’s second brand – Everet for non-car lift garage equipment and solutions.

  • 2011

    Awarded OE contract to designed and manufactured 2-Post lift low arms for Jaguar China Obtained OE approval from FAW Toyota, FAW VW, Luxgen, and a number of car manufacturers

  • 2013

    Received Maintenance Equipment and Supplier Excellence Award from FAW Toyota.
    Added Single Post Car Lifts to complete EAE’s car lift product line for all types of vehicles with a curb weight of under 6 tons.
    Launched commercial vehicle scissors lift with a lifting capacity of 26 tons at the 2013 Automechanika Shanghai.

  • 2015EAE became the only two-post lift supplier of Great Wall Automobile building station at south China.
    EAE lift was approval by RENAULT at China.
    EAE E2 series car lifting machine has won the national invention patent.
  • 2017

    First time show in Autopromotec in Italy and AAAE show in Australian.

  • 2020Vehicle Lift Intelligent Management System successfully developed.
  • 2004

    Exported Tire Changing and Wheel Balancing Machines into USA .
    Obtained CE certifications and Exported Car-Lifts into Europe.

  • 2006Established manufacturing facility in Wujiang, China.
  • 2008Obtained ISO9001: 2000 from SGS UK.
    Obtained Approval from GEA/VOSA UK for EAE’s 4-Post Car Lift with optional playdetector to be part of the MOT vehicle testing process in the UK.
    Started to build distributor channel in domestic market.
  • 2010

    Obtained Australian Worksafe approval for EAE’s car-lifts.
    Obtained GOST Russia certification.

  • 2012Renamed Ever-Eternal as EAE (Everlift And Everet ).
    Obtained OE approval and awarded dedicated car lift supplier contract from Peugeot DS.
    Supplied Car-Lifts to Ferrari and Rolls Royce car dealerships in China.
    Obtained OE approval and awarded dedicated car lift supplier contract to design and manufacture large platform scissors lifts to compliment the 2 technician high efficiency repair process of Great Wall Motors’ dealerships in China.
  • 2014

    Awarded contract to design and manufacture industrial car lifts for Tesla China.

  • 2016

    EAE has been approved as Recommended Supplier by GM, BORGWAR and SHELL in mainland China.
    EAE participated in Automechanika Germany for fifth time, and first time in SEMA show in United Sates with new products.
    Successfully developed the heavy duty two post lift, capacity 8 ton.

  • 2018Mobile column lift and heavy duty scissor lift released.
  • 2022A series of intelligent lifts were successfully launchedincluding mobile column vehicle lifts and new generation2-post lift.