×

EE-612E | 2.5T Mobile Single Post Lift

● 2500kg lifting capacity
● Mobile type
● Swing arms design makes it easy to locate picking-up points
● One button controls up and down

EE-612FE | 2.5T Fixed Single Post Lift

● 2500kg lifting capacity
● Fixed type
● Swing arms design makes it easy to locate picking-up points
● One button controls up and down

C12E | 6.0T Clear Floor Lift

● 6000kg Lifting capacity
● 110mm min. Height
● 1900mm Lifting height
● Electrical release

6214EKZ/6215EKZ | 4.0T/5.0T Asymmetric Clear Floor Lift

● 4000kg/5000kg Lifting capacity
● 1970mm lifting height
● Asymmetric,30 degree of columns installation makes door open wider

6215E | 5.0T Clear Floor Lift

● 5000kg lifting capacity
● 1900mm lifting height
● Electrical release
● Versatile, from Smart to Sprinter

62C | 3.5T/4.2T Two Post LIift with APS Technology

● 3500kg /4200kg lifting capacity
● With APS technology (Accurate Parking System)
● 1900mm lifting height
● One hand and one side operation

6255E | 5.0T Base Plate Two Post Lift

● 5000kg lifting capacity
● 1900mm lifting height
● Electrical release
● Versatile, from Smart to Sprinter

62B | 3.5T/4.2T Two Post LIift with APS Technology

● 3500kg / 4200kg Lifting capacity
● With APS technology (Accurate Parking System)
● 1900mm lifting height
● One hand and one side operation

EE-6445P | 4.0T Parking Lift

● 4000kg lifting capacity
● 1970mm lifting height
● 4900mm longer runways
● Easy on-site installation and less demanding on foundation

EE-6435V2.S | 4.0/5.0T/6.5T Four Post Lift

● Flat platform for general service use
● Electrical Safety Lock Release System (E version)
● 5780 mm Max. platform length
● Reliable mechanical safety locking system

EE-4S | 4.0T Four Post Lift

● 4000kg lifting capacity
● 1970mm lifting height
● 4900mm longer runways
● Easy and friendly to operate

EE-6435V2.B | 4.0/5.0T/6.5T Four Post Lift

● Long slip plate and adjustable turntable positions for alignment use
● Electrical Safety Lock Release System (E version)
● With the maximum lifting capacity being up to 6500kg
● 6280 mm Max. platform length

EE-6435V2.B.PD | 4.0/5.0T Four Post Lift

● MOT four post lifts for Class IV&VII vehicles
● Electrical Safety Lock Release System (E version)
● 5780 mm Max. platform length
● Reliable mechanical safety locking system

EE-6435V2.BWF | 4.0/5.0T Four Post Lift

● Electrical Safety Lock Release System (E version)
● 5780 mm Max. platform length
● Standard Wheel Free Lift witch with 4000 kg lifting capacity

EE-65A.40T | 4.0T Full Rise Scissor Lift

● 4000 kg lifting capacity
● 130mm drive-on height
● 1930mm Max. Lifting height
● Above-ground or in-ground installation

EE-6503V2 | 3.5T Full Rise Scissor Lift

● Automatic Leveling System or electrical leveling available
● Extendable platform, one side or double sides for long vehicles
● In-ground installation

EE-6501V2 | 3.0T Full Rise Scissor Lift

● 3000kg lifting capacity
● 110mm drive-on height
● Starting up plate ensures quiet ground touching
● Above-ground or in-ground installation

EE-MR35 | 3.5T Mid Rise Scissor Lift

● 3500kg lifting capacity
● 110mm drive-on height
● Starting-Up plate, for easy raising from low point
● Mobile or fixed mount design

EE-MR30 | 3.0T Mid Rise Scissor Lift

● 3000kg lifting capacity
● 105mm drive-on height
● Double safety ,hydraulic and mechanical
● Mobile or fixed mount design

EE-TS6600 | 3.0T Mid Rise Scissor Lift

● 3000kg lifting capacity
● Portable, easy to move
● Double safety ,hydraulic and mechanical

EE-MS12 | 1.2T Mobile Lifting Table

This mobile lifting table is designed for dismantling and fixing batteries of electric vehicles as well as engine, gearbox, drive axle, fuel tank,suspension, bracket and chassis components of traditional vehicles.

EE-MS10 | 1.0T Mobile Lifting Table

This mobile lifting table is designed for dismantling and fixing batteries of electric vehicles as well as engine, gearbox, drive axle, fuel tank,suspension, bracket and chassis components of traditional vehicles.

EE-6603.S | 4.2/5.0T Long Platform Scissor Lift

● Flat platform for general service use
● 5000 kg(11000 lbs.) lifting capacity
● 5100mm (200 13/16”) Max. Platform Length
● Automatic Leveling System or electrical leveling available

EE-6604V2.S | 4.0T Low Profile Scissor Lift

● Flat platform for general service use
● 4000 kg lifting capacity
● 180mm Drive-on height
● Surface installation, no concrete works needed ramps included

EE-6603.B | 4.2/5.0T Alignment Scissor Lift

● Long slip plate and adjustable turntable positions for alignment use
● 5100mm Max. Platform Length
● Automatic Leveling System or Manual levelling

EE-6604V2.B | 4.0T Low Profile Scissor Lift

● Long slip plate and adjustable turntable positions for alignment use
● 180mm Drive-on height
● Surface installation, no concrete works needed ramps included

EE-LX35.B | 3.5T Low Profile Scissor Lift

● Long slip plate and adjustable turntable positions for alignment use
● 3500kg lifting capacity
● 140mm Drive-on height
● Add-On Wheel Alginment runway kit

EE-HX6BWF | 6.0T Long Platform Scissor Lift

● 6000kg lifting capacity
● 5424mm long flat runways for general service use
● Electrical levelling
● Standard Wheel Free Lift

EE-6603.BWF | 4.2/5.0T Alignment Scissor Lift

● 5000kg lifting capacity
● 5100mm Max. Platform Length
● Automatic Leveling System
● Standard Wheel Free Lift

EE-6604V2.BWF | 4.0T Low Profile Scissor Lift

● 4000kg lifting capacity
● 180mm Drive-on height
● Surface installation, no concrete works needed ramps included
● Standard Wheel Free Lift

EE-E28 | 8.0T TWO POST LIFT

● 8000kg lifting capacity
● 1900mm Lifting height
● Hydraulic drive, PLC control, precise synchronization with no steel ropes

EE-6435V2.S/B | 6.5T

● Electrical Safety Lock Release System (E version)
● 6208mm Max. platform length
● Standard Wheel Free Lift witch with 6500kg lifting capacity
● It can serve the most of road vehicles from passenger cars to vans, heavy pick-ups and some trucks as well.

EE-HDM Series | 20T-80T Heavy Duty Mobile Column Vehicle Lift

● 10000KG capacity per column
● Set up by combining 2, 4, 6 or 8 columns
● Wireless Communication
● STM32 microchip technology in the control system
● Communicate wirelessly by WLAN or be connected by cables

EE-HX Series | 15T-45T Heavy Duty Long Platform Scissor Lift

● 15000kg-45000kg lifting capacity
● 8000mm long flat runways for general service use
● Visual interface technology
● Maximally set up by combining 3 sets of lift (6 lift platforms) working synchronously together.

EE-MLH1000 | 1.0T Hydraulic Lifting Table

● 1000kg lifting capacity
● Hydraulic driven system, smooth running
● Applicable to motorcycles, ATVS, lawn mower etc.

EE-CJ | 3.0T Rolling Jack

● 3000kg lifting capacity
● Durable and compact scissor carrying structure
● Adjustable width between support wheels to fit different widths between runways
2019 Australian Auto Aftermarket Expo
2019.04.29 1193 share to:

During April 4th to 6th, EAE continued to display its fine products in AAAE (Australian Auto Aftermarket Expo) after the success back in 2017, Australia.

 

 

Australia is a country that owns a long history and strong culture in automobile, however, the maintenance and repair equipment business was mainly cornered by both the Europe and American producers. As one of the most important and professional makers of lifts in China, EAE started to benefit the customers there with its high quality products but with reasonable price several years ago. Our sole partner, Tufflift, has more than sixty years experience in car lift installation and service, displayed EAE lifts in the AAAE, to let visitors see the high quality “made in china” design and manufacturing.

 

 

This year our display stand was upgraded with new lift designs, including the portable scissor lifts and the four post lift for 3D wheel aligning, which are all approved by Worksafe, and a five-year guarantee for the mechanical structure and a two-year guarantee for the electrical and hydraulic components. The costumers, in turn, feels safe using the products and trusts our designs.

 

 

As always, EAE’s motto is ‘All are safe, the Cars and the People’. EAE will constantly remain close to the international market standard, continuously improving and enhancing the lift designs, all the better to make the best for the costumers. Through the exhibition, EAE will be able to display its most advanced technologies to Australian customers, to improve their impression of China made automotive equipment.

 

Latest News