×

EE-612E | 2.5T Mobile Single Post Lift

● 2500kg lifting capacity
● Mobile type
● Swing arms design makes it easy to locate picking-up points
● One button controls up and down

EE-612FE | 2.5T Fixed Single Post Lift

● 2500kg lifting capacity
● Fixed type
● Swing arms design makes it easy to locate picking-up points
● One button controls up and down

C18E | 8.0T Heavy Duty Two Post Lift

● 8000kg lifting capacity
● 4900mm in total
● Different height available upon request
● 1980mm lifting height
● Electrical release

C12E | 6.0T Clear Floor Lift

● 6000kg Lifting capacity
● 110mm min. Height
● 1900mm Lifting height
● Electrical release

6215EKZ/6214EKZ | 5.0T/4.0T Asymmetric Clear Floor Lift

● 5000kg/4000kg Lifting capacity
● 1970mm lifting height
● Asymmetric,30 degree of columns installation makes door open wider

6215E | 5.0T Clear Floor Lift

● 5000kg lifting capacity
● 1900mm lifting height
● Electrical release
● Versatile, from Smart to Sprinter

62C | 3.5T/4.2T Two Post LIift with APS Technology

● 3500kg /4200kg lifting capacity
● With APS technology (Accurate Parking System)
● 1900mm lifting height
● One hand and one side operation

62B | 3.5T/4.2T Two Post LIift with APS Technology

● 3500kg / 4200kg Lifting capacity
● With APS technology (Accurate Parking System)
● 1900mm lifting height
● One hand and one side operation

6255E | 5.0T Base Plate Two Post Lift

● 5000kg lifting capacity
● 1900mm lifting height
● Electrical release
● Versatile, from Smart to Sprinter

EE-6445P | 4.0T Parking Lift

● 4000kg lifting capacity
● 1970mm lifting height
● 4900mm longer runways
● Easy on-site installation and less demanding on foundation

EE-6435V2.S | 4.0/5.0T Four Post Lift

● Flat platform for general service use
● Electrical Safety Lock Release System (E version)
● 5780 mm Max. platform length
● Reliable mechanical safety locking system

EE-4S | 4.0T Four Post Lift

● 4000kg lifting capacity
● 1970mm lifting height
● 4900mm longer runways
● Easy and friendly to operate

EE-6435V2.B | 4.0/5.0T Four Post Lift

● Long slip plate and adjustable turntable positions for alignment use
● Electrical Safety Lock Release System (E version)
● 5780 mm Max. platform length

EE-6435V2.B.PD | 4.0/5.0T Four Post Lift

● MOT four post lifts for Class IV&VII vehicles
● Electrical Safety Lock Release System (E version)
● 5780 mm Max. platform length
● Reliable mechanical safety locking system

EE-6435V2.BWF | 4.0/5.0T Four Post Lift

● Electrical Safety Lock Release System (E version)
● 5780 mm Max. platform length
● Standard Wheel Free Lift witch with 4000 kg lifting capacity

EE-65A.40T | 4.0T Full Rise Scissor Lift

● 4000 kg (9000lbs.) lifting capacity
● 130 mm (5 1/8”) drive-on height
● 1930 mm (76”) Max. Lifting height
● Above-ground or in-ground installation

EE-6503V2 | 3.5T Full Rise Scissor Lift

● Automatic Leveling System or electrical leveling available
● Extendable platform, one side or double sides for long vehicles
● In-ground installation

EE-6501V2 | 3.0T Full Rise Scissor Lift

● 3000kg lifting capacity
● 110mm drive-on height
● Starting up plate ensures quiet ground touching
● Above-ground or in-ground installation

EE-MR35 | 3.5T Mid Rise Scissor Lift

● 3500 kg (8000 lbs.) lifting capacity
● 110 mm(4 5/16”) drive-on height
● Starting-Up plate, for easy raising from low point
● Mobile or fixed mount design

EE-MR30 | 3.0T Mid Rise Scissor Lift

● 3000kg lifting capacity
● 105mm drive-on height
● Double safety ,hydraulic and mechanical
● Mobile or fixed mount design

EE-TS6600 | 3.0T Mid Rise Scissor Lift

● 3000kg lifting capacity
● Portable, easy to move
● Double safety ,hydraulic and mechanical

EE-MS12 | 1.2TMOBILE LIFTING TABLE

This mobile lifting table is designed for dismantling and fixing batteries of electric vehicles as well as engine, gearbox, drive axle, fuel tank,suspension, bracket and chassis components of traditional vehicles.

EE-6604V2.S | 4.0T Low Profile Scissor Lift

● Flat platform for general service use
● 4000 kg(9000 lbs.) lifting capacity
● 180mm (7 1/16”) Drive-on height
● Surface installation, no concrete works needed ramps included

EE-6603.S | 4.2/5.0T Long Platform Scissor Lift

● Flat platform for general service use
● 5000 kg(11000 lbs.) lifting capacity
● 5100mm (200 13/16”) Max. Platform Length
● Automatic Leveling System or electrical leveling available

EE-6604V2.B | 4.0T Low Profile Scissor Lift

● Long slip plate and adjustable turntable positions for alignment use
● 180mm Drive-on height
● Surface installation, no concrete works needed ramps included

EE-6603.B | 4.2/5.0T Alignment Scissor Lift

● Long slip plate and adjustable turntable positions for alignment use
● 5100mm Max. Platform Length
● Automatic Leveling System or electrical leveling available

EE-LX35.B | 3.5T Low Profile Scissor Lift

● Long slip plate and adjustable turntable positions for alignment use
● 3500kg lifting capacity
● 140mm Drive-on height
● Add-On Wheel Alginment runway kit

EE-6604V2.B.PD | 4.0T Low Profile Scissor Lift

● MOT long platform scissor lift with standard rear side slip plate and adjustable turntable positions
● 180mm Drive-on height
● Surface installation, no concrete works needed ramps included

EE-6603.B.PD | 4.2/5.0T Alignment Scissor Lift

● MOT long platform scissor lift with standard rear side slip plate and adjustable turntable positions
● 5100mm Max. Platform Length
● Automatic Leveling System or electrical leveling available

EE-HX6BWF | 6.0T Long Platform Scissor Lift

● 6000kg lifting capacity
● 5424mm long flat runways for general service use
● Electrical levelling
● Standard Wheel Free Lift

EE-6604V2.BWF | 4.0T Low Profile Scissor Lift

● 4000kg lifting capacity
● 180mm Drive-on height
● Surface installation, no concrete works needed ramps included
● Standard Wheel Free Lift

EE-6603.BWF | 4.2/5.0T Alignment Scissor Lift

● 5000kg lifting capacity
● 5100mm Max. Platform Length
● Automatic Leveling System or electrical leveling available
● Standard Wheel Free Lift

EE-HX15 | 15T Heavy Duty Long Platform Scissor Lift

● 15000kg lifting capacity
● 8000mm long flat runways for general service use
● Wireless Communication
● Visual interface technology
● Maximally set up by combining 3 sets of lift (6 lift platforms) working synchronously together.

EE-C18E | 8.0T Heavy Duty Two Post Lift

● 8000kg lifting capacity
● 4900mm in total
● Different height available upon request
● 1980mm lifting height
● Electrical release

EE-HX6 | 6.0T Long Platform Scissor Lift

● 6000kg lifting capacity
● 5424mm long flat runways for general service use
● Electrical levelling
● All versions, S, B, BWF,BPD platforms

EE-MLH1400 | 1.4T Hydraulic Lifting Table

● 1400kg lifting capacity
● Hydraulic driven system, smooth running
● Applicable to motorcycles, ATVS, lawn mower etc.

EE-MLH1000 | 1.0T Hydraulic Lifting Table

● 1000kg lifting capacity
● Hydraulic driven system, smooth running
● Applicable to motorcycles, ATVS, lawn mower etc.

EE-CJ | 3.0T Rolling Jack

● 3000kg lifting capacity
● Durable and compact scissor carrying structure
● Adjustable width between support wheels to fit different widths between runways

EE-SCJ | 3.0T Rolling Jack

● 3000kg lifting capacity
● Durable and compact scissor carrying structure
● Adjustable width between support wheels to fit different widths between runways
Company news
Let's congratulate that Ever-Eternal E2 series car lifting machine has won the national Invention patent
2014.04.22 204 share to:

After nearly two years, Ever-Eternal R&D team started off the angle of users' installation operation and maintenance, dared to try and continuously broke thinking framework; it successfully passed validation of new-type two-post lift E2 series with industry breakthrough concepts, and had been authorized and accepted by Chinese National Patent Office.

After E2 appearing,

Two-post lift does not have the difference between baseplate type and gantry type anymore;

Two-post lift does not need to level steel wire rope anymore;

Two-post lift does not need to climb upon anymore because its installation becomes easier;

Two-post lift does not operate at only one side, but two sides already;

Two-post lift does not have the difference between symmetry and asymmetry anymore; it will be ok however you install it;

Two-post lift does not need to be lifted to the highest for 50 seconds anymore, only 25 seconds is ok.

Two-post lift can stop work by itself if it is out of step, which can avoid from the chance of turnover.

Distribution partners will not lose the sales because customers want to buy gantry type but you only have baseplate type;

Distribution partners do not need to worry about how many baseplate type and gantry type to be prepared will be suitable;

After E2 appearing,

we will bring you more......

Thanks for the effort of R&D team, your team cooperation consciousness and the constantly advancing to personal power have perfectly reflected corporate value. We hope that you can continue to maintain the continuously innovative spirit of daring for the world first, in order to promote enterprise development and elevate the status of China's auto maintenance industry in the whole world.



 




New-type two-post lift E2 series



The group photo of Ever-Eternal R&D team, bestowing certificate of honors



 


Latest News