1.Wall panel meterial is Rock wool,thickness 50mm,wall panel side with metal covered
2.CE standard components , phase protection, Motor Y/△ start, with pressure meter
3. 2 pcs 7.5kw fan with anti blast vane wheel
4.the damper of painting/baking functionj is switched by cylinder driver
5.Safe door is tempered glass window,with a pedal in front of door,with a EXIT intruction light above door.
6.Press frame structure aviation joint for wire terminal,tempered glass for light cover.
7.With pressure sensor and 3 buzzer alarm；control terminal output is 24v；CE standard transformer and safety；7-core wire, color: active(AC red, DC blue), negative black, earth green and yellow，all wires with number, all earth connected to main earth，and with earth sign；contactor terminal not exposure.Warning label:“twist”、“hot surface”、“electric”；labels under instruction light of intake fan and exhaust fan; labels for 3 buzzer alarm
8.optional Riello RG5S diesel burner or gas burner.
9.optional environmental protection facility
10.optional water-soluble painting
Air Return Style:Full down draft,basement high 325mm
Front Door Structure:3 folded without frame
Safe Door:1 piece in the side wall,2000X800mm,at side of booth,with pressure lock,tempered glass window,with a pedal in front of door,with a EXIT intruction light above door.
Wall Panel Meterial:Rock wool,thickness 50mm,wall panel side with metal covered
Top Light:8X4X18W LED light ,press frame structure aviation joint for wire terminal,tempered glass for light cover.
Side Light:8X2X18W LED light, press frame structure aviation joint for wire terminal,tempered glass for light cover.
Intake Fan:1x7.5KW fan,with anti blast vane wheel
Exhaust Fan:1X7.5KW fan,with anti blast vane wheel
Generator Frame:Iron frame with aluminum angle
Damper:Automatic pneumatic circular damper
Buner:Italian Riello G20
Exhaust Duct:4M straight ducts,2pcs of elbows
Control Box:Chinese components,Motor direct start,overload,overheat,phase-lacking proteced
Filter Installed:hingle installed,mounted above support frame
Floor:3 rows of veins plate,2 rows of grids
Ramp:2 pcs of veins plates style ramps
Max Drying Temperature:60℃-80℃
Motor Voltage:380V/50HZ/3PH(（If you need other power supply, we will add some cost for each blower）
Please enter your password